Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player
Parallel

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player
Conical

Ballnose Engraving Cutters

A cutter with a radiused tip that produces a rounded rather than flat bottom. The cutter is extremely effective for reverse engraved, color filled acrylic. Available as a parallel tool (straight sides) or as a conical tool (angled sides). Parallel Ballnose cutters are available from .060" tip to the full shank diameter. Conical Ballnose are available from .010" to half the shank diameter.


See Antares Fact Sheet on Ballnose Cutters.

Shank Size Part No. Prefix Specify Material Thickness Available Cutter
Tip Width
1/8" × 4 1/2"
Solid Micrograin Carbide		 AC-125-BN-___ For acrylic and other plastics. PAR = .060" to .125"
CON = .010" to .060"
11/64" × 6 1/2"
Micrograin Carbide Tipped		 AC-171-BN-___ For acrylic and other plastics. PAR = .060" to .171"
CON = .010" to .085"
11/64" × 6 1/2"
Solid Micrograin Carbide		 AC-175-BN-___ For acrylic and other plastics. PAR = .060" to .171"
CON = .010" to .085"
1/4" × 6 1/2"
Micrograin Carbide Tipped		 AC-250-BN-___ For acrylic and other plastics. PAR = .060" to .250"
CON = .010" to .125"
1/4" × 6 1/2"
Solid Micrograin Carbide		 AC-255-BN-___ For acrylic and other plastics. PAR = .060" to .250"
CON = .010" to .125"