Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Profiler Engraving Cutters

A cutter with a narrow profile effective for fine detail engraving and cutting out shapes where a slight bevel is acceptable. The standard angle on a Profiler is 15°. Recommended for applications where the smallest Parallel tip available is too wide or too fragile. Specify a classification of "PRO" and material when ordering.
Shank Size Part No. Prefix Specify Material Available Cutter Tip Width
1/8" × 4 1/2"
Solid Micrograin Carbide		 AC-125-PRO-___ Specify ACR, FLX, PHN, BAL, or SSS .015" to .060"
11/64" × 6 1/2"
Micrograin Carbide Tipped		 AC-171-PRO-___ Specify ACR, FLX, PHN, BAL, or SSS .015" to .060"
11/64" × 6 1/2"
Solid Micrograin Carbide		 AC-175-PRO-___ Specify ACR, FLX, PHN, BAL, or SSS .015" to .060"
1/4" × 6 1/2"
Micrograin Carbide Tipped		 AC-250-PRO-___ Specify ACR, FLX, PHN, BAL, or SSS .015" to .060"
1/4" × 6 1/2"
Solid Micrograin Carbide		 AC-255-PRO-___ Specify ACR, FLX, PHN, BAL, or SSS .015" to .060"